21 – Tag Out

7 May 2003

Alert 03 – 22 Use of Rope & Bucket to Catch Samples Results in a Hand Injury

Alert 03 – 22 Use of Rope & Bucket to Catch Samples Results in a Hand Injury WHAT HAPPENED: During a cementing job, the slurry was batch
7 April 2003

Alert 03 – 17 Working on Operating Equipment Results in Hand Injury

Alert 03 – 17 Working on Operating Equipment Results in Hand Injury WHAT HAPPENED: A welder was experiencing problems with the governor control on a portable welding
7 April 2003

Alert 03 – 16 Mismatched Hammer Unions Still Being Found

Alert 03 – 16 Mismatched Hammer Unions Still Being Found WHAT HAPPENED: Reports continue to come in involving pressurized lines and the unions used on these lines.
7 January 2003

Alert 03 – 01 Nitrogen Bottles Improperly Filled

Alert 03 – 01 Nitrogen Bottles Improperly Filled WHAT HAPPENED: Recently a Toolpusher performed a gas test on the Nitrogen(N2) bottles on location. One nitrogen bottle was found
8 November 2002

Alert 02 – 50 Cutting Off Casing Results in Fire in the Cellar

Alert 02 – 50 Cutting Off Casing Results in Fire in the Cellar WHAT HAPPENED: Casing (13 3/8″) had been run in the hole and cemented in
8 November 2002

Alert 02 – 48 Improper Hole Covering Results in Injuries

Alert 02 – 48 Improper Hole Covering Results in Injuries WHAT HAPPENED: During a rig move, it was necessary to remove a 3’ circle section of grating
8 October 2002

Alert 02 – 46 Fall from Mud Pump

Alert 02 – 46 Fall from Mud Pump WHAT HAPPENED: A derrickman opened the relief valve to bleed off the mud pump then made repairs to stop
8 August 2002

Alert 02 – 34 Safety Lanyard Near Miss Incident

Alert 02 – 34 Safety Lanyard Near Miss Incident WHAT HAPPENED: While tripping pipe in the hole one floorman went down to the BOP Stack to assemble
8 August 2002

Alert 02 – 33 Hand-Held Angle Grinder Injury

Alert 02 – 33 Hand-Held Angle Grinder Injury WHAT HAPPENED: A rig welder was working on the rig floor modifying the rotary guard. While dressing a weld