IADC Drilling Middle East 2017 Conference & Exhibition

Start: 3 October 2017
End: 4 October 2017

Venue: The Westin Dubai Al Habtoor City
Location: Dubai

Conference Sponsors

 
 

 Registration Information

Click Here To Register Online For This Event

      • Registration for this event is USD 950 per attendee.
      • Employees of federal regulatory agencies may be eligible for a 50% discount on conference registration.
      • Speakers, sponsors and guests are not eligible for online registration. (Please contact europe@iadc.org to obtain the correct registration form)
      • In order to receive a letter of invitation, IADC requires payment via Wire Transfer.  The wire transfer information is included on the registration form.  (Complete the Conference Registration Form PDF below)
      • Click here to download the Conference Registration Form (PDF format)

For registration inquiries, please contact europe@iadc.org / + 31 24 675 2252.

Conference Program

Tuesday, 3 October 2017

07.00 Conference Registration, Coffee Service & Open Exhibition

08.30 Welcome, Introduction & Safety Briefing

08.40 Keynote Presentation: Saudi Aramco (invited)

09.00 Market Outlook: Erik Tønne, Director/Head of Offshore Research, Clarksons Platou Offshore

09.30 IADC Chapter Updates:

  • IADC North Arabian Gulf Chapter: Hamoud A. Al-Shammari, IADC Chapter Chairman; Manager, Saudi Aramco
  • IADC Southern Arabian Peninsula Chapter: Dave Formas, IADC Chapter Chairman; Sr. Marketing Manager, Ensco plc

10.00 Networking Break & Open Exhibition

10.30 Technology & Innovation
Session Chairs: Abdullah Al Marri, Superintendent (Drilling Rig Services Division), Saudi Aramco, & Jamie Rawson, Operations Manager Middle East Region, Rowan Companies, Inc

Drilling Control Rooms of the Future: Espen Botnan: Product Line Manager Drilling Control, Cameron Sense AS
The driller, or well execution engineer, as some call it, is now responsible for a bigger part of the overall drilling process as automation and mechanization on rigs increase and the market moves toward performance-based, as opposed to day-rate, contracts. More information must now be absorbed and analyzed; hence, the driller is more important for safe and efficient drilling processes. Therefore, it is more critical than ever to ensure that the well execution engineer has an optimal working environment.

The Horsepower Misconception – Why Hoisting Efficiencies and Economies Improve with Multi-speed Draw Works and Intelligent Power Management: Don MacDonald, Technical Director, Jon Deagle, Pacific Rim Engineered Products
Why hoisting efficiencies and economies improve with multi-speed draw works and intelligent power management. A comparison of a single-speed draw works with the performance of a 3 speed draw works and the benefits that can be derived from adding energy management will be made.

Process Automation Provides Optimization Platform, Leads to Reduced Vibrations When Engaging the Formation: Chris Mullin, Product Development Engineer, Ryan Hanford, Francisco Ocegueda-Hernandez, Gilbert Chahine, National Oilwell Varco
An overview is given of how the process automation system lowers the drill bit to bottom. Several examples of detailed field data are presented to highlight engaging techniques before and after the process automation system is installed. Specific examples of vibration data are provided to show performance gains from the automated bit engaging process, versus manually lowering the bit into the formation. Additionally, the technology required for the process automation system to fully optimize the formation engaging process will be outlined and the next steps in present and future development discussed. 

12.00 Luncheon & Open Exhibition

 13.30 Operators Perspective on How to Preserve or Improve Performance While Cutting Costs
Moderator: Mike Dubose, Vice President International Development, IADC

Performance is critical to the success of every drilling project. This panel will discuss the role of Operators in preserving and advancing drilling performance in the Middle East through the downturn cycle. Topics will include a discussion of Operators expectations from Contractors in terms of performance and cost reduction, and as well as the role of Operators to advance drilling technology. 

  • Paul Forman, VP Wells, Middle East, BP Oman
  • Said Al Mahrooqi, Wells Operations Manager (UWO), Petroleum Development Oman
  • Ghassan Muhanna, GM Exploration & Petroleum Engineering, Bahrain Petroleum Company 

15.00 Networking Break & Open Exhibition 

15.30 Health, Safety & Environment
Session Chairs: Wayne Bauer, Director QHSE, Vantage Drilling, & Mohammad Eljaber, Product Line Manager, National Oilwell Varco 

Importance of Verifying that Our People on Board Understand they are All Barriers in Preventing a Well Control Incident: Graham Robertson, Director SHE, Shelf Drilling
Process safety is so important for the majority of companies for now and the future, how do we ensure we have the barriers in place and those barriers are fit for the task? People are involved in all major hazards and we must verify and validate that the barriers are in place, whether they be human or hardware. Going back to basics and good industry practice is getting the response desired and we are seeing the change. 

DROPS Safety and Mitigating Risk with Technology: Leon Dashwood, Global Operations Director, OES Oilfield Services Group
DROPS Safety is a major focus for the onshore and offshore Oil & Gas Industry. The prevention of predictable and needless incidents or accidents is imperative. No more so than in the arena of DROPS Safety, where every near miss or incident carries a human factor, either as an originating occurrence or as a consequence. Technological advances such as Tablet based inspections, RFID & remotely operated drones are contributing to saving lives and livelihoods. We, in the inspections industry, are investing heavily in these and other technologies to improve onshore/offshore safety and rig equipment integrity to reduce both the consequences of a DROPS event or the likelihood. This presentation will focus on why DROPS safety is still fundamental and how the technologies at our disposal, are helping all in the Oil & Gas community manage this risk. 

Sustainable Process Safety Awareness through Effective Implementation of HSE Case: Yoga Rajan, HSE Manager, Noble Drilling
Process Safety is no longer an uncommon subject within the drilling industry. Whilst many still suffer with poor understanding and confining Process Safety to well control event, there is a large scope to understanding these failures. In this presentation you will see how to run an effective barrier ownership program, understand major accident event and relationship to Bow-Ties and how training & competencies impact the workforce. The HSE case should also be revised as evolving document and this can be easily done. We also explore technological advancement in having an online e-HSE Case.
 

Effective Communication in a Diverse Industry: Kenny Adams, Head of Land Drilling QHSSET, KCA Deutag
Effective communication is crucial for a safe working environment to exist; we simply cannot work safely if we fail to communicate effectively. Within our organization we now develop various ways to successfully communicate the HSE message utilizing various types of technology and initiatives. Acknowledgement is easy to achieve in the work place but engagement is the critical key to success, engagement through communication is one area that we have developed to improve our safety performance. 

17.30-18.30 Welcoming Reception & Open Exhibition

 Wednesday, 4 October 2017 

07.30 Conference Registration, Coffee Service & Open Exhibition 

08.30 Welcome, Introduction & Safety Briefing 

08.35 Keynote Presentation: Ihab Toma, CEO, Vantage Drilling

 09.00 Drilling Technology & Innovation
Session Chairs: Simon Rushton, Vice President Operations, Shelf Drilling, & Salaheddin Turki, Head Development and Learning, National Drilling Company 

Innovative Solution to Enhance Directional Drilling Performance in Multilateral and Extended Reach Wells: Muhammad Muqeem, Supervisor, Ossama Sehsah, Oscar Bautista Sayago, Saudi Aramco, Roel Zaadnoordijk, Tom Newman, Vladimir Bochkarev, ED-Projects BV
This technology was developed to challenge the shortcomings of the 40+ year old conventional blade stabilizer. This Drillstring Stabilizer (IDS) design is considerably different. Performance of the tool was compared to that of a conventional spiral blade stabilizer. Field deployment including the setup, process and going forward plan will be outlined. 

Lessons Learnt from Using a Drilling Connection in Extreme Conditions: Marta Lafuente, Product Champion Drilling Connections, Fabien Carrois, Vallourec
An overview is given of the different techniques for increasing the available torque of existing drilling products, the limitations of these techniques and the best practices that can be implemented to reduce the risks when using drilling tubulars beyond the API-recommended make-up torques. 

10.00 Networking Break & Open Exhibition 

10.30 Managing Risk during the Extended Downturn
Moderator: John Huffman, Middle East Manager – Operations, ENSCO plc 

In today’s challenging market, lower remuneration for services grabs headlines and receives the most attention.  What goes unseen by the public yet has the potential to be even more detrimental to a company’s survival, are the terms and conditions contractors are being offered in the service contracts.  As service providers face fewer and fewer opportunities, the pressure increases to accept risks that they would not otherwise accept in a more typical market environment.  Risks such as early termination and providing additional integrated services, while not preferred, are known and quantifiable. Other risks related to liabilities and indemnities with potentially unlimited exposure are difficult to quantify and have the potential to have catastrophic consequences to companies. This panel will discuss some of the trends in service contracts and address some risks that contractors are being pressured to accept. 

  • Rania Tadros, Partner at Ince & Co
  • Paul Finnett, Managing Director Global Sector Leader, Contractors, Aon Risk Solutions
  • Tristan Marchetti, Procurement Manager, Halliburton
     

12.00 Luncheon & Open Exhibition 

13.30 Technology & Innovation
Session Chairs: Kees van de Vrede, Drilling Adviser, Dubai Petroleum, & Mike Simpson, CEO, Cansco Dubai 

A Holistic Approach to Automating Current Drilling Processes Using Machine Learning: Philippe Herve, VP Solutions, Spark Cognition
There’s been a great deal of enthusiastic discussion around the idea of automation, but it can’t take place overnight. Before you automate your processes, you need to ensure that your rigs are safe, your assets are in good condition, and your operations are optimized—otherwise, you’re simply automating poor or suboptimal procedures. Machine learning can address these three needs by (1) using anomaly detection to guard against cyber threats; (2) monitoring and optimizing operations using prescriptive maintenance; and (3) sensing and adapting to downhole conditions in real time. 

Development of Comprehensive Inspection Program for Drill Bits through Joint Industry Project for Failure Risk Mitigation and Reduction of Inspection Cost: Amol Mulunjkar, Service Quality Manager, Bala Durairajan, Anthony Griffo, John Williams, Schlumberger, Samit Gokhale, Austin Wells, TH Hill Associates
This presentation shows the procedures and acceptance criteria developed by the technical committee that address the inspection of cracks & porosity in matrix & steel bit bodies, wear and erosion of bit bodies, cracks in PDC cutters, and other damage to cutters. Based on this information the DS-1 Bit Inspection Technical Standard (BITS) was developed to address the necessity of a globally accepted standard for the inspection of bits.

Geomechanical Study for MPD Feasibility in the Carbonate Reservoirs Sothern Iraq Oilfield: Ethar Alkamil, Ph. D. Student, Husam Abbood, Ralph Flori, University of Missouri Science and Technology
MPD operations are evaluated based on the geomechanical modeling parameters with drilling practice consideration which increase the drilling efficiency and the profit. Wells in the E oilfield in southern Iraq are typically drilled overbalanced and therefore often experience a high percentage of nonproductive time (NPT) due to stuck pipe and differential sticking. The MEM results show that the Mishrif Formation in field E has a narrow acceptable mud weight range to prevent collapse and differential sticking, which represents a driver for selecting MPD. Finally, this study shows that MPD is feasible through the Mishrif Formation, which reduces the risk of stuck pipe, decrease the NPT, avoid the formation damage, and increase the well delivery.

15.00 Networking Break & Open Exhibition 

15.30 Market Challenges
Session Chairs: Peter Cunnion, Vice President, Northern Offshore Drilling, & Manoj Raghavan, Country Manager, Growth Markets, KCA Deutag

Big Value from Big Data – Reducing your Total Cost of Ownership: John Hoeflich, Product Line Director, Equipment Monitoring Solutions, National Oilwell Varco
Big data provides big value when the data translates to actionable information that reduces cost. Rig owners are transitioning from calendar based maintenance to 21st century techniques such as usage, condition and predictive based maintenance. Field examples will highlight how manual analysis is being replaced by automated analytics, enhanced by equipment design knowledge and historical data. Evolving technology makes it easier and more cost effective to apply these capabilities across a wide range of rigs and equipment, enhancing return on investment for programs that significantly reduce total cost of ownership, helping to offset the effects of today’s challenging environment.

Towards Improved Reliability of Offshore Control Systems: Experiences from Hardware in the Loop (HIL) Testing: Mirnes Alic, Senior Engineer, DNV GL
The use of software based control systems in offshore industry has increased rapidly the last decade, and the increasing dependence of software driven systems results in less transparency and added complexity for testing and verification. Most of the software driven control systems on today’s vessels are put into operation without independent testing and verification, meaning that software verification of complex automation systems has not kept pace with the technology development on vessels. HIL technology enables testing of software in control systems both as standalone and as integrated part of a larger automation system.
 

16.30 Adjournment

Unassigned Papers of Note:

The following paper proposals will be included in the conference if a scheduled paper becomes unavailable. In addition, these presentations will be made available in the IADC conference proceedings, should the author so desire.

Reducing Stuck Pipe Costs through Collaborative Stuck Pipe Prevention Approach: Devi Putra, Senior Drilling Specialist, Pertamina
The background, the objective and the programs of the Pertamina stuck pipe prevention campaign will be outlined. It will elaborate the collaborative stuck pipe prevention training program. The presentation will explain how the training has been conducted and the feedback from the trainees. The results in terms of number of stuck pipe incidents will be reported and also how near miss has been handled by the trained drilling teams.

A New HPWBM Bridging System Facilitates in Drilling High Over Balance and Depleted formations- A Success Story from Kingdom of Saudi Arabia: Ajay Addagalla, GeoMarket Technical Manager, Rafael Pino, Carlos Parra, Prakash Jadhav, Baker Hughes
The new fluid design used to drill the high OB wells (>4500 psi) in sandstone formation will be discussed and a detailed lab customization, field application, and recommendations will be outlined.

Program Committee Members

Said Abdullah Al Mahruqi, Petroleum Development Oman
Abdullah S. Al Marri, Saudi Aramco
Ghassan Al Muhanna, Bahrain Petroleum Company
Wayne Bauer, Vantage Drilling
Jason Crowe, Paragon Offshore
Raymond Dunn, Noble Corporation
Mike Edmonson, National Services and Drilling Company
Mohammad Eljaber, National Oilwell Varco
Eric Houlleberghs, Sakson Drilling & Oil Services DMCC
John Huffman, Ensco plc
Nick McBride, RDC Middle East
Manoj Raghavan, KCA Deutag
Eric Roth, Dubai Petroleum
Simon Rushton, Shelf Drilling
Mike Simpson, Cansco
Mike Strauss, Ensign Energy Services
Salaheddin Turki, National Drilling Company
Kees van de Vrede, Dubai Petroleum
Dave Geer, IADC

Sponsorship Opportunities

There are four levels of sponsoring: Diamond sponsors, Platinum Sponsors, Gold Sponsors, and Silver Sponsors. Event sponsorships are also available and will be categorized by monetary contribution with the appropriate level of sponsorship. Please find the benefits of the sponsor packages below. The conference sponsor will receive high profile recognition before, during and after the conference.

Diamond Sponsor Header

Diamond $25,000
(10 Comps*)

img-Platinum

Platinum $15,000
(5 Comps*)

img-Gold

Gold $10,000
(3 Comps*)

img-Silver

Silver $5,000
(1 Comp*)

web-EVENT-SPONSOR

Reception $10,000
(3 Comps*)

web-EVENT-SPONSOR

Luncheon $6,500
(2 Comps*)

web-EVENT-SPONSOR

Coffee $5,000
(1 Comp*)

web-EVENT-SPONSOR

Brochure $5,000
(1 Comp*)

* Comps refer to number of complimentary registrations

Click here to view complete sponsor packages and benefits

Click here to download the sponsor agreement

For more information and sponsor bookings please contact us at europe@iadc.org or phone: +31 24 675 2252.

Exhibitors

IR & E Trading LLC

 Vallourec

Wild Well Control

Woodhouse International FZE

Exhibition Information

The cost of each 3 x 2 meter stand is USD 3000. Each standard shell scheme will be set with a skirted table, two chairs, access to electricity and 1 fascia with company name. With the standard shell scheme stand, you receive 1 complimentary conference registration and up to 2 additional registrations at half price or USD 475. All registrations are including admission to the conference & exhibition, coffee breaks, luncheons, reception, and access to the conference proceedings. All personnel working the exhibition should be registered.

IADC Exhibitions will solely be visited by conference attendees. Non-conference attendees are not allowed to enter the exhibition area.

Reservations can be made by completing the letter of agreement and returning it by e-mail: europe@iadc.org
Exhibition space is being allocated on a first come, first served basis.

Click here to view the exhibition floor plan

Click here to download the letter of agreement

Exhibitions at IADC events will be limited to showcasing products and services that advance technology, competency or HSE. Exhibitions centered on recruitment or employment should not take space at IADC events.

For more information and exhibition bookings please contact us at europe@iadc.org or phone: +31 24 675 2252.

Hotel/Venue Information

The Westin Dubai Al Habtoor City
PO Box 124405, Dubai, UAE
Phone: + 971 4 275 15544 –  www.westindubaialhabtoorcity.com

Room Rates:
Deluxe room, inclusive breakfast, exclusive tax, single occupancy AED 850,-, double occupancy AED 950,-
Cancellation Policy:
Cancellations received before 25.09.2017 are free of charge. Cancellations received during 25.09.2017-30.09-2017 the equivalent of 1 night accommodation charges will be applied. Cancellations received after 01.10.2017 the entire length of stay booked will be applied as cancellation fee. The roomblock will expire on 10 September 2017. After this date rooms are upon availability.
Reservations:
Reservations can be made by following this link or calling the reservations department at +971 4 275 5544. Please do not forget to mention IADC to receive the negotiated group rate.

Warning: Please note that there are several 3rd party companies actively approaching conference delegates and exhibitors by phone and email trying to sell hotel rooms at the contracted hotel for a cheaper rate than the published rate on this conference website. Please note that these companies do not represent IADC or the hotel, nor has IADC or the hotel authorized them to use their names or trademarks on information they send out to exhibitors and delegates.

To avoid being a victim of fraud, please do not give out your credit card details to any other party and be sure to make your hotel reservations exclusively through the contracted hotel.

Toggle

 

Press Policy

Complimentary press registration is limited to one (1) person per company. This individual must be a titled editor, writer, reporter or other bona fide editorial representative of a legitimate industry or consumer publication. Publishers and sales and marketing specialists are excluded from this complimentary registration practice and must pay the full conference registration fee to attend an event.

The IADC Drilling Middle East 2017 Conference & Exhibition is advertised in industry publications media including:

Click the logo to visit: Click the logo to visit:
DC Logo Events Footer Upstream_logo_news_source

IADC provides web links as a member service. IADC does not warranty or endorse the accuracy or reliability of any of the information, content, or advertisements contained on websites linked to www.iadc.org or any of its subsidiary pages.

Event Summary

IADC Drilling Middle East 2017 Conference & Exhibition